XH200 Verstärker

XH200
Output power; 20Hz-20kHz 70V line 200W x 2, RL=50ohms
100V line 200W x 2, RL=25ohms
Output power; 20Hz-20kHz 70V line 200W x 2, RL=50ohms
100V line 200W x 2, RL=25ohms
Output power; 20Hz-20kHz 70V line 200W x 2, RL=50ohms
100V line 200W x 2, RL=25ohms
Output power; 20Hz-20kHz 70V line 200W x 2, RL=50ohms
100V line 200W x 2, RL=25ohms
Total harmonic distortion Less than 0.1% (40Hz-20kHz; Halfpower), RL=4ohms
Intermodulation distortion Less than 0.1% (60Hz:7kHz=4:1; Halfpower)
Frequency response +0dB, -0.5dB (HPF=40Hz, 80Hz~20kHz)
S/N ratio More than 103dB (DIN AUDIO)
Hum & noise level Residual output noise Less than -65dBu
Crosstalk Less than -60dB
Voltage gain 38dB (100V), 35dB (70V)
Input sensitivity +4dBu
Maximum input voltage +22dBu
I/O Connectors Line input / output ports 2x Euroblock
Speaker output ports 2x Barrier strip
Control ports D-sub 15pin
Processors HPF (40Hz/ 80Hz, 12dB/oct)
Protection circuit Load protection Power switch on/off mute, DC-fault (Output relay off; Restored automatically), Clip limiting (THD ≥ 0.5%)
Amplifier protection Thermal (Mute the output; heatsink temp ≥ 90°C; return automatically), VI limiter (Limit the output, RL ≤ 16ohms)
Power supply protection Thermal (Amplifier shuts down automatically, Operation not restored automatically; heatsink temp ≥ 90°C)
Amplifier class EEEngine
Cooling Variable-speed fan
Power requirements Depend on area of purchase; 100V, 120V, 230V or 240V; 50/60Hz
Power consumption Music source equivalent 400W
Idling 40W
Stand-by 5W
Dimensions W 480mm; 18-7/8in
H 88mm; 3-7/16in (2U)
D 412mm; 16-1/4in
Net weight 9.8kg; 21.6lbs
Accessories Owner’s manual, AC power cable, Security cover, 4x 3-pin Euroblock connector